Setup by code

Back to overview
1/7

Setup by code

If the brand of your device is not listed in the SimpleSet feature, you can set up by trying codes individually. To do this firstly locate your brand in the Code List. Brands a listed by device type; TV, Streamer or Audio (Receiver or Soundbar). Each code consists of 5 digits, which can be entered by using the following keys to represent the digits 1-6:

 

Image
Streamer Setup by Code
2/7

.

Turn on your device (not on standby) and point the OFA remote towards it. 
 

Image
TV AAN
3/7

.

TV

Hold down TV Power and BACK keys until the yellow LED under the ring blinks twice. 

 

Streamer / Digital Media Box

Hold down STREAMER POWER and HOME - until the red LED under the ring blinks twice

 

 

 

Audio Receiver, Sound Bar

Hold down Volume + and Volume – until the Green LED under the ring blinks twice.

Image
Streamer TV POWER _ Back
Image
Streamer Power_Home
Image
Streamer Volume +-
4/7

.

Enter the first 5 digit code listed for your brand (e.g. 31331 for Telefunken TV).

Image
 Streamer setup by code stap3.jpg
5/7

.

The green LED will blink twice.

Image
 2x groen.jpg
6/7

.

Now aim the remote towards your device and press the Power (or Mute*) key.

7/7

.

If the device turns off (or mutes*), your remote is ready to use. If not, repeat steps 2-5 with the next code in the list.

tip

* If you are setting up an Audio Video Receiver or Sound Bar, please try the Mute key during step 6.

Image
TV uit
Back to overview