Evolve 2

URC 7125

Where to buy?

Control your TV and Cable/Satellite/DVB-T/Freeview box with just one remote.

The pre-programmed activity 'Watch TV' helps you to control both devices without switching between devices (volume goes to TV, channels go to the box). The Evolve 2 is optimised to work with Smart TVs and is guaranteed to work all brands.

Combine 2 in 1

Combine 2 in 1

Control your TV and Set Top Box (Cable/Satellite/DVB-T) with just 1 remote.

Smart activity 'Watch TV'

The convenient Watch TV activity offers seamless control of your TV and Set Top Box without changing between device types. E.g. channel keys operate Set Top Box, volume keys operate TV.

Smart activity 'Watch TV'

Smart TV

Smart TV

Optimised keypad for control of smart televisions.

Ultra wide angle

Due to the ultra wide infrared angle, you can control your devices even without pointing exactly in their direction.

Guaranteed to work all brands.

Additional Information

Product code URC 7125
Universal Remotes
Learnable / copy any function of your original remote control
Teletext / fasttext
Controls multiple devices types at the same time
Service upgradable
30 seconds to setup your remote
Device mode indicator
Batteries 2 x AAA (not incl.)
Internet Upgradable No
No. of devices 2
Satellite/Cable/DVB-T/IPTV receiver
Freeview / TNT / TDT / DTT

FAQs and Solutions

  • The Find your Setup Code Tool indicates that the code for my device is not in the memory of my Evolve 4, what do I need to do?

    The Find Your Setup Code Tool is the easiest way to look up the right code for your device.
    In some cases this tool indicates that the code is not in the memory of your remote and cannot be set up right away.

    To resolve this we can offer you the following options: 

    Read more
  • How can I set up a device on my Evolve 2 if I do not have a code? If you do not have a code for your device, you can
    1. refer to the code list in the back of the user manual,
    2. use the learning function of your Evolve, or
    3. click here to open our "Find your setup code" tool and enter the exact make and model number of your device.
    Read more
  • How do I program my code on my Evolve 2?

    To program the basic code on your Evolve 2 remote, please follow the instructions mentioned below:

    Read more
  • Does the Evolve 2 operate my Sky+ or SkyHD receiver?

    Yes, the Evolve operates all brands including this one. The basic code for most mainstream Sky+ receivers is Satellite code 1175. For SkyHD, this is Satellite code 1662.

    Read more
  • Which device key do I use on my Evolve 2 for Freeview?

    On the Evolve, the STB key should be used for programming the Freeview.

    Read more
  • How can I program a missing function on my Evolve 2? It is possible to add missing functions via a procedure known as “Key Magic.”
    If you provide the relevant information via this web form we will supply a 5 digit code to be programmed for each missing function.
    To use the Key Magic procedure, please follow the instructions outlined below: 

    1. Use the MODE key to select the relevant device key.
    2. Hold down the MAGIC key until the light blinks once and then twice and stays lid. 
    3. Enter the code 994, the light blinks twice. 
    4. Press the Magic key once
    5. Enter the code of the required function, see below.
    6. Press the One For All key you wish to assign the function to. 
    7. The light blinks twice and that key should now function.

    Please note:

    • The MODE key, CombiControl key and Magic key cannot be programmed.
    • The functions listed here might not all be compatible with your specific make and model. Programming a function that does not exist on the original remote control might cause malfunction or damage for which One For All cannot be held responsible.

    It is also possible to learn a missing function, using your original remote. To read more about the Learning feature, please follow this link.

    Read more
  • How can I learn a missing function on my Evolve 2 using the original remote control?

    Your One For All remote is capable of copying functions straight from the original remote control that came with your device.  It is also possible to program missing function via the Key Magic procedure.

    Read more
  • Why doesn’t the learning work on my Evolve 2?

    There are a number of reasons why learning might be unsuccessful:

    Read more
  • When trying to learn a key, the Evolve 2 gives one long blink. What does this mean?

    A long blink indicates that the Evolve failed to learn the signal from the original remote. There could be a number of reasons for this.

    Read more
  • How can I delete a learned key on my Evolve 2?

    If you would like to delete a learned function that you no longer require, please follow the procedure outlined below:

    Read more
  • Can I operate two or more of the same devices with the Evolve 2? Yes, it is possible, as long as the remote supports 2 or more devices.

    Another device mode will have to be changed into the required device mode.
    To do this please use the procedure below:

    1. Hold down Magic until the LED stays on.
    2. Enter the code 992, the light will blink twice.
    3. Using MODE, select the Source Device key.
    4. Press MAGIC once.
    5. Using the MODE key, select the device key that will be changed.
    6. Press MAGIC once, the light will blink twice.


    Read more
  • Can I send a sequence of commands from the press of one button?

    Yes, your Evolve is capable of creating Macros.

    Read more
  • How can I delete a macro on my Evolve 2?

    In order to delete a macro, please follow the instructions below:

    Read more
  • How do I associate the volume keys to one particular device on my Evolve 2?

    It is possible to lock the volume on your Essence 2 to a single device key (for example: the volume control could be linked only to a TV). This means that when the remote is in DVD or SAT mode and the volume keys are pressed, the TV volume will still be activated.

    Read more
  • How do I move a function from one key to another on my Evolve 2?  

    To move a particular key within the same device mode:

    Read more
  • How do I perform a factory reset on my Evolve 2?

    Before resetting the Evolve, please take the following into account:
    If you have ever sent in your remote control to our Upgrade Service for an update, these codes will be erased as well. In that case, it is highly advised not to perform a factory reset.

    To reset your remote to the manufacturer's setting, please follow the procedure outlined below:

    Read more
  • How do I reset a device on my Evolve 2?

    If you would like to reset a device mode, please use the following procedure:

    Read more
  • I need to press and hold down the POWER key for my device to switch on. How can I include this is in a Macro? Our remote controls always send out the standard duration of a signal, which enables most Macros.
    In your case, you need to keep the key pressed for a few seconds, which we are unable to reproduce into our Macros.
    Unfortunately, there is no solution for this. Our apologies for any inconvenience this may cause.
    Read more
Contact Customer Support